SPC Stage 5 Miba Racing Clutch Kit Is a brand new stage 5 Xtreme Duty Racing Pressure Plate With Stage 5 6-Puck Copper Ceramic SOLID Miba Racing Disc Setup can hold and 80% more pressure increase over stock. SPC Stage 5 Miba 6-Puck Miba composite Disc is the best material for friction. It is used for Aircraft Brakes and is stronger than any other material in the clutch disc industry. If you want the best the industry has to offer, ask for SPC 6 Puck Miba Solid Rigid Copper Ceramic Miba Racing Disc.
The SPC Racing 6 Puck Miba Disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba Delivering Aggressive Bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, The SPC Racing 6 Puck Miba Strip Disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality'upgrade' from the original equipment clutch.
This kit comes with everything you need for a new clutch job or clutch upgrade. If you are selecting a kit without a new flywheel, then be sure to resurface and rebalance your old flywheel prior to installation for best performance and result. Street Or Long Life Of Clutch Break-In Required. Features Of SPC Stage 5 Miba Racing Clutch System. Heavy Duty Stage 5 Heavy duty racing pressure plate. Precision heat treated single diaphragm. Re-Arched Diaphragm for Superior Engagement.NO unnecessary increase in pedal pressure. 6-Wings Ceramic Button Disc without sprung for heavily modified vehcles. More Grip Power, longer lasting. High Temperature Resistance: Up To 930F (500C), Short Time Up To 1650F (900C). High And Stable Level Of Friction Coefficient.
Miba Generates 3 To 15% Lower Torque Peaks Compared To The Competition; Reduces Gear Shocks Loads And Same Material As Using Aircraft Brakes. Miba Friction Group Has Been A Development Partner And Supplier Of High-Performance Friction Materials To The Automotive And Machine Industry For Over 30 Years.
We Offer Optimized Components For Clutches, And Use High-Quality Materials And Innovative, Technologically Advanced, Processes To Ensure Excellent Wear-Resistance And Friction Coefficients. Clutch Segments Generate The Friction Needed For Torque Transfer From Engine To Transmission, Enabling The Vehicle To Start.They Are Characterized By Particularly High Temperature Resistance And Low Wear. Friction Materials Are An Important Performance Element In Vehicle And Machine Clutches, And Play A Key Role In Overall Efficiency. SPC Stage 5 Heavy Duty Pressure Plate (2400lbs Clamping Load). SPC Stage 5 6-PUCK Solid Ceramic MIBA Racing Disc (228mm, 28 Spline).
SPC Premium Heavy Duty Clutch Throwout Release Bearing. SPC Premium Heavy Duty Clutch Alignment Tool. Fits 1992 - 1995 Volkswagen Corrado SLC (2.8L SOHC 6cyl 12-valve; 5-speed). Surface Finish : Cast Iron, Copper-Ceramic MIBA Solid. Country of Manufacture : United States.FILE PICTURES ARE FOR REFERENCE ONLY. Must be in brand new, resalable condition. We are located in Southern California. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits". The seller is "clutchxperts" and is located in this country: US.
This item can be shipped worldwide.